User Manual

7
GREASE MESH FILTERS
The mesh filters can be cleaned by hand.
• Remove the decorative board and wipe it clean with a damp cloth. Then,remove
the aluminium filter by pressing and holding the 2 slots.
• Place the aluminium filter upside down. Then detach the charcoal filter.
• Soak the aluminium filter into the solution of warm water and mild detergent for
about 10 minutes.
Attaching filters
• After cleaning, attach the charcoal filter to the aluminium filter. Then secure with the
3/4 iron wires.(Model 60CM has 3 iron wires and Model 90CM has 4 iron wires.)
Please note: The charcoal filter is not included in the product.
• Insert the aluminium filter into the cooker hood. Then insert the decorative board and
close it into place.