User Manual

12
OPERATION
1. Press “ ” button once and the lights will be turned on. The LCD will
show Press again to turn off.
2. Press “ ” button once; the hood works at LOW speed and LCD will
display low speed. Press the speed button repeatedly to cycle through Low
Medium and Fast speeds. If speed is pressed again after Fast speed. The
fan will be turned off.
3. For Timer settings, press and hold the “ ” button for 2 to 3 seconds;
will be shown on LCD and flashes; which represents the hour.
Press “ ” button once and the time will increase by 1 hour. Continue
pressing “ ” button; the timer will reach 23. When LCD shows 23; it
doesn’t work by pressing “ ” button. Press the lamp button to reduce the
hour by 1 each time.
After setting the hour; you can start setting the minute by pressing “ ”
button again. on LCD flashes; which represents minutes.
Follow the previous steps for changing the hour, to change the minutes.
After setting hour and minutes, press “ ” to confirm.
The timer button is used for delay timer function. Delay timer function allows
you to set the hood to automatically power off according to the delay timer
you can set between 1 minute to 60 minutes. Press “ ” button once and
the hood will enter the delay timer mode. The LCD will show .
Press “ ” button once and the timer will increase by 1. Continue pressing “
” button; it will display from ; ; … until
Press “ ” button to reduce the timer. After setting delay timer
press the timer button to confirm the settings.