User Manual

CARBON FILTER（OPTIONAL）

Activated carbon filters should be used to trap odours (optional – available

from the same stockist you purchased the hood from) and must be used if the

hood is not vented to the outside. Reference:

eiQCF110 Carbon Filter Pack– fits model eiQCHA90B, eiQCHA90SS

In order to install the activated carbon filters, the aluminium filter should be

removed first. Press the lock and pull it downward as below:

Put the activated carbon filter onto the end of the motor unit and turn it in anti-

clockwise direction. Repeat the same on the other side (see diagram).

NOTE:

• Make sure the filter is securely locked. Otherwise, it could loosen and

cause damage to the unit.

• When the activated carbon filters are attached, the suction power will

be lowered.

• The charcoal filter cannot be washed or recycled. It should be changed

at three or six months according to the amount of use the hood

receives. Replacements are available from the stockist you purchased

the hood from.