User Manual

CLEANING AND MAINTENANCE

Before cleaning, switch the unit off and disconnect the power.

Use a soft cloth moistened with mild soapy water or household cleaning detergent.

Never use metal pads, chemicals, abrasive material or stiff brushes to clean the

unit.

NOTE: Do not use a steam cleaner to clean the hood as electrical components

could be damaged or short-circuit as a result.

MONTHLY CLEANING FOR METALLIC ANTI-GREASE FILTER

IMPORTANT NOTE: Clean the filter every month; an excessive build-up of grease

can become a fire hazard. The filter collects grease, smoke and dust, so the filter

directly affects the efficiency of the cooker hood. If it’s not cleaned, the grease

residue (potentially flammable) will saturate on the filter.

Clean it with a soft nylon brush in a mild solution of warm water and a small amount

of washing up liquid. Washing up liquid alone should not be used. After cleaning,

allow the filter to drain and then dry thoroughly.

The grease filter may also be cleaned in a dishwasher; using a 60°C program, with

the filter upright (short sides upright) in the lower basket. Please be aware some

dishwasher cleaning agents can permanently discolour the filter, though this will not

affect its performance.

Replacement grease filters are of the universal type available from many household

and DIY stores.

STAINLESS STEEL

The stainless steel must be cleaned regularly (e.g. weekly) to ensure long life

expectancy.

Dry with a clean soft cloth. A specialised stainless-steel cleaning fluid may be used.

Ensure that wiping is done along with the grain of the stainless steel to prevent any

unsightly crisscross scratching patterns from appearing.

CONTROL PANEL SURFACE

The control panel inlay can be cleaned using warm soapy water. Ensure the cloth is

clean and well wrung before cleaning. Use a dry soft cloth to remove any excess

moisture left after cleaning.

Using neutral detergents and avoid using harsh cleaning chemicals, strong

household detergents or products containing abrasives, as this will affect the

appliance appearance and potentially remove any printing of artwork on the control

panel and will void manufactures warranty.