User Manual

INSTALLATION

INSTALLATION OF WINDOW KIT

WARNING: Before using this unit, please keep it upright for at least 3-4 hours.

This unit can easily be moved from one room to another.

While moving the unit please note that it must always be kept upright and then placed on an even surface.

1. Attach the shtail connector to the end of the hose, by

extending the end and twisting until rmly attached (At least

3 full rotations).

2. Attach the connector on the opposite end of the pipe to the exhaust

outlet on the rear of the appliance by putting into position and twisting to

lock in place.

The window kit (slide bar and shtail) can be used

with sliding windows and doors. For other types of

window, the shtail should be used on its own.

1. Partially open the window and place

the extended slide bar in position

before closing the window onto it.

2. Fix the shtail adaptor into the

opening on the slide bar

3. Fix the exhaust connector on the

opposite end of the exhaust hose to

the exhaust outlet on the rear of the

air conditioner.

3. Make sure the unit is upright and there are no obstructions to

the air inlets and outlet grills.

50CM