User Manual

PROFILE TAB

The profile tab gives you the option to edit both your detail, and use the added

features of the unit.

CHANGING THE NAME OF YOUR DEVICE

When in any of the device screens further settings for the device can be

accessed, by pressing on the three dots in the top right hand corner. The top

option within this allows you to change the name of the device to something

relevant to the use of the product, such as “Living Room Air Conditioner”.

Within the menu, you also have the option of setting up a pattern lock or

change your password.

MESSAGE CENTRE

Shows alerts generated by the App.

MORE SERVICES

This allows the unit to be integrated with your favourite home automation

hardware such as Google Home and the Amazon Echo.

CONNECTION TROUBLESHOOTING

1. Check whether the device is powered on and is in the correct WIFI connection mode, if not please refer to

the CHANGING BETWEEN CONNECTION MODES section on page 12.

2. Ensure the WIFI password has been entered into the app correctly (Case sensitive)

3. Check that the phone is connected to the WIFI you are connecting the device to.

4. Ensure the network you are connecting it to is 2.4Ghz (5Ghz WIFI networks are not supported), and that

there is a strong WIFI signal to the item.

5. If your router is dual band, ensure that the 2.4ghz network has a different network name (SSID). Further

advice on changing router settings will be available from your Internet service provider / Router

manufacturer.

6. Check the settings on the router. Encryption should be WPA2-PSK and authorisation type should be set to

AES

7. Try using the alternative connection method. i.e. If connection is failing when attempting to connect

through EZ mode, try AP mode.