User Manual

CONNECTING USING AP MODE (ALTERNATIVE METHOD)

Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing once

per second. If not follow the instructions for changing the WIFI connection mode. Also ensure your phone

is connected to the WIFI network. (We advise turning mobile data off during setup)

1. Open the app and press “+”

to add device

2. Select the type of device

as “Air Conditioner (WIFI)”

within the Large Home

Appliance tab.

3. Select your network, enter

your WIFI password and

press Next.

4. Ensure the WIFI light on the

air conditioner is slowly

flashing (once per three

seconds), then select AP

Mode in the top right corner

before pressing on the orange

button at the bottom of the

screen to confirm

5. Go to network settings in your

phone and connect to the

“SmartLife xxx” connection.

then press on the orange

button at the bottom of the

screen to confirm

6. Go to network settings in your

phone and connect to the

“SmartLife xxx” connection.

There is no password to

enter. Then return back to

the app to complete setup.

This will then transfer the settings to the air conditioner.

Once the connection process has completed, go back to the network settings on your phone to

ensure your phone has reconnected to your WIFI router.