User Manual

14
CONNECTING USING EZ (QUICK CONNECTION) MODE
Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing twice per
second. If not follow the instructions for changing the connection mode. Also ensure your phone is connected
to the WIFI network. (We advise turning mobile data off during setup)
1. Open the app and press “+”
to add device
2. Select the type of device
as “Air Conditioner (WIFI)”
within the Large Home
Appliance tab.
3. Select your network, enter
your WIFI password and press
Next.
4. Ensure the WIFI light on
the air conditioner is
flashing twice per second
then press on the orange
button at the bottom of
the screen to confirm
5. This will then transfer the
settings to the air conditioner.
Wait for this to complete. If
this fails, retry. If still
unsuccessful please review
the troubleshooting section
for further help.