User Manual

INSTALLATION

INSTALLATION OF WINDOW KIT

WARNING

: Before using this unit, please keep it upright for at least 3-4 hours.

This unit can easily be moved from one room to another. While moving the unit please note that it must

always be kept upright and then placed on an even surface.

1. Attach the shtail connector to the end of the hose, by

extending the end and twisting until rmly attached (At least

3 full rotations).

2. Attach the connector on the opposite end of the pipe to the exhaust outlet

on the rear of the appliance by putting into position and twisting to lock in

place.

The window kit (slide bar and shtail) can be used with sliding windows and doors. For other types of window, the

shtail should be used on its own.

2. Fix the shtail adaptor into the

opening on the slide bar

3. Fix the exhaust connector on

the opposite end of the exhaust

hose to the exhaust outlet on

the rear of the air conditioner.

1. Partially open the window and place the

extended slide bar in position before closing

the window onto it.

3. Make sure the unit is upright and there are no obstructions to the air

inlets and outlet grills.

50CM