Manualshelf

User Manual

ManualsBrandselectriQ ManualsAir Conditioners12000 BTU Quiet Portable Air Conditioner for rooms up to 30sqm - Dual plug EU+UK
12345678910
7
OPERATION
Press the POWER button to turn the unit ON or OFF.
Press the MODE button to cycle between the 4 modes, the indicator for the selected mode will
be illuminated.
COOL: The room is cooled with the cold air expelled through the front air outlet while hot air is
expelled through the vent pipe. The desired room temperature can be set between 17 and 30
degrees using the + and – buttons, and the fan speed can be changed using the SPEED button.
FAN (AIR PURIFY): The fan speed can be changed pressing the SPEED button. When used with
the HEPA filter installed, the appliance will work as an effective air purifier.
DRY (DEHUMIDIFY): Should be operated without the vent hose, but with continuous drainage to
remove moisture from the air. The relative humidity is displayed, while the desired humidity can
be adjusted between 35-85% using the + and - buttons.
SMART COOL: An intelligent cooling mode where the fan speed is automatically adjusted based
on the amount of cooling required. Attempts to change the fan speed will move the unit into
COOL mode.
Repeatedly press the SPEED button to cycle through the five fan speeds. Each time the SPEED
button is pressed, the fan speed will be displayed. The fan speed can be changed between F1
(Low) to F5 (High). In F1 and F5 the corresponding indicator will also illuminate.
Press to enter sleep mode. The sleep indicator will be illumined and all other indicators will be
turned off. In sleep mode, the appliance works at low fan speed. Press SLEEP again to exit sleep
mode.
Alternatively press and hold the sleep button for 3 seconds, and the unit will operate with the
existing settings, but with the lights turned off.
The timer functions cannot be combined or repeated.
POWER ON TIMER
With the appliance in standby, press the TIMER button to set the power-on timer. Use the + and
- buttons to adjust the duration of the timer (1 to 24 hours). The Timer indicator will turn on and
the unit will start after the selected number of hours.
POWER OFF TIMER
With the appliance running with the desired settings, press the TIMER button to set the power-
off timer. Use the + and - buttons to adjust the duration of the timer (1 to 24 hours). The timer
indicator will illuminate and the unit will stop after selected number of hours.
Used to adjust temperature in COOL/SMART COOL mode, set the desired humidity in DRY mode
and to set the duration of the TIMER. Press both buttons together to change between displaying
the temperature in Celsius and Fahrenheit.
Press this button to enable the swing function. The louvres will slowly move from side to side. If
swing is pressed again the louvres will stop in their current position.