User Manual

8
ASSEMBLY
The appliance must be fully assembled before plugging in. In order to prevent damage to the compressor,
after assembly the unit must be left in an upright position for 2 hours before plugging in.
ATTACHING THE WHEELS (EDC30 and EDC50)
1. Attach the Axle to the base of the appliance using the 4 bolts provided.
2. Fix the wheels onto each end of the axle using the supplied washers and nuts, ensuring that they
are secure.
3. Turn the appliance upright, and stand on the wheels.
ATTACHING THE HANDLE
ECD30 and ECD50
ECD70
The handle is supplied resting against the rear of
the unit for transportation. Unfold the handle so it
is in the upright position and secure using the two
bolts provided.
Attach the handle to the rear of the unit using the
4 bolts provided.
Wheel
Axle
Bolt
Bolt
Handle
Bolt
Handle