USER MANUAL EAP500HC Thank you for choosing electriQ Please read this user manual before using this innovative Air Purifier and keep it safe for future reference. Visit our page www.electriQ.co.
CONTENTS SAFETY INSTRUCTIONS 4 AIR PURIFIER DIAGRAM 5 ABOUT YOUR AIR PURIFIER 6 INFORMATION ON INDOOR POLLUTANTS 7 OPERATION INSTRUCTIONS 8 BEFORE FIRST USE 8 HOW TO USE 9 EXTRA FEATURES 10 CARE AND MAINTENANCE 10 CHANGING THE FILTER 10 CLEANING THE AIR QUALITY SENSOR 10 CLEANING THE CASE 11 CLEANING THE FILTERS AND FILTER HOLDING AREA 11 CLEANING THE FILTER COVER AND CLEAN AIR OUTLET 11 TECHNICAL SPECIFICATION 11 TROUBLESHOOTING 12 SUPPORT 12 3
SAFETY INSTRUCTIONS Important! • Carefully read the instructions before operating the unit. • This appliance is for indoor use only. • This unit must only be connected to a 220-240V / 50Hz earthed outlet. • Installation must be in accordance with regulations of the country where the unit is used. • If you are in any doubt about the suitability of your electrical supply, have it checked and, if necessary, modified by a qualified electrician. • This air purifier has been tested and is safe to use.
• The use of accessory attachments that have not been approved by the appliance manufacturer is not recommended, as this may result in fire, cause an electric shock and/or cause personal injury. • Ensure hands are fully dried before plugging or unplugging the appliance. • The appliance should not be installed in laundry or wet rooms. Energy Saving and Unit Safety Protection Tips • Do not cover or restrict the airflow from the outlet or inlet grills.
ABOUT YOUR AIR PURIFIER The EAP500HC provides multiple stages of air purification using professional air filtration and intelligent sterilisation technologies. This unit features an advanced all in one photocatalytic HEPA and activated carbon filter for improved air filtration. • • • • • • • Primary filter, made of non-woven materials, are used for removing large particles like hair and dust. Elementary filter removes large particles like dust and hair. Antibacterial HEPA filter to remove 99.
INFORMATION ON INDOOR POLLUTANTS VOC (Volatile Organic Compound): VOCs come from motor vehicle exhausts, gasoline vapour, pollutants such as formaldehyde, ammonia and many other common and chemical solvents such as paints and glues, or can be a by-product of mould growth. VOCs cause irritation to the eyes and or nose as well as causing headaches, nausea and even potential damage to the central nervous system.
OPERATION INSTRUCTIONS BEFORE FIRST USE: 1) Unpack the appliance and remove the filter cover from the front of the unit 2) Remove the filter from the plastic protective packaging 3) Load the composite filter into the front of the unit and replace the cover. 4) Remove the power adapter and connect it to the DC socket on the base of the unit.
HOW TO USE: DISPLAY Shows Air Quality (PM index) Speed / Timer when appropriate button pressed Press to turn the appliance on and off. POWER TIMER With the unit turned on, repeatedly press the timer button to select in how many hours it should turn off. The duration can be set between 1 and 12 hours in 1 hour increments. To turn off the timer, repeatedly press the timer button until 0 is shown. SPEED Press to change between the four fan speeds. The speed will be displayed on the screen.
EXTRA FEATURES: TURN OFF THE FRONT COLOUR INDICATOR Press and hold the Power and Speed buttons for 5 seconds to turn the colour indicator on and off. IONISER Press and hold the Power and Auto buttons for 5 seconds to turn the ioniser on and off. RESET THE FILTER CHANGE COUNTER After changing the filter, Press and hold the Auto and Timer buttons for 5 seconds to reset the filter change timer.
CLEANING THE CASE • • • • Only use tepid water and a mild detergent on a soft cloth. Do not use bleach or abrasives. Do not splash water directly onto the main unit. Avoid wetting the power connection port, doing so may cause an electric shock and can lead to the insulation deteriorating or unit to rust. CLEANING THE FILTERS AND FILTER HOLDING AREA • Hoover the filter gently every 2-3 weeks or more often if used in dusty environments.
TROUBLESHOOTING ISSUE CHECK Check that the power adapter is connected and is the correct rating. Not working Ensure the front panel is correctly fitted and that the peg on the rear of the panel is undamaged. Check if the filter is clean. Abnormal Smells Replace the filter. Pollutants not removed and loud noise when running Check if the filter is clean. Replace the filter Abnormally high Air Quality (PM2.5) reading for prolonged period.
