USER MANUAL EAP120HC-WIFI DESKTOP AIR PURIFIER Thank you for choosing electriQ Please read this user manual before using this innovative Air Purifier and keep it safe for future reference. Visit our page www.electriQ.co.
CONTENTS SAFETY INSTRUCTIONS 3 AIR PURIFIER DIAGRAM 5 ABOUT YOUR AIR PURIFIER 6 INFORMATION ON INDOOR POLLUTANTS 7 OPERATION INSTRUCTIONS 8 USING THE TOUCH CONTROLS 8 BEFORE FIRST USE 8 HOW TO USE 9 AIR QUALITY INDICATOR 10 ESSENTIAL OIL DIFFUSER 10 CONNECTING THE APPLIANCE TO WIFI 11 CONTROLLING YOUR APPLIANCE THROUGH THE APP 16 CARE AND MAINTENANCE 21 CHANGING THE FILTER 21 CLEANING THE CASE 22 CLEANING THE FILTERS AND FILTER HOLDING AREA 22 CLEANING THE BOTTOM COVER AND CL
SAFETY INSTRUCTIONS Important! • Carefully read the instructions before operating the unit. • This appliance is for indoor use only. • This unit must only be connected to a 220-240V / 50Hz outlet. • Installation must be in accordance with regulations of the country where the unit is used. • If you are in any doubt about the suitability of your electrical supply, have it checked and, if necessary, modified by a qualified electrician. • This air purifier has been tested and is safe to use.
• Avoid removing the power cord from the socket whilst the unit is still in operation. This could cause electrical damage. • Never use the power supply as a switch to start and turn off the air purifier. Use the provided ON/OFF button located on the control panel. • Always place the unit on a dry and stable surface. • The use of accessory attachments that have not been approved by the appliance manufacturer is not recommended, as this may result in fire, cause an electric shock and/or cause personal injury.
AIR PURIFIER DIAGRAM Air Outlet Control Panel Air Quality Indicator Air Quality Sensor Air Inlet Power Cord 3 in 1 Filter Cartridge Aromatherapy Sponges Aromatherapy Sponge holders Bottom Cover 5
ABOUT YOUR AIR PURIFIER The EAP120HC-WIFI provides multiple stages of air purification using professional air filtration and intelligent sterilisation technologies. This unit features advanced HEPA and activated carbon filters for improved air filtration. • • • Primary filter, made of non-woven materials, are used for removing large particles like hair and dust. Antibacterial HEPA filter to remove 99.9% of airborne particles of 0.25 micrometres or larger.
INFORMATION ON INDOOR POLLUTANTS VOC (Volatile Organic Compound): VOCs come from motor vehicle exhausts, gasoline vapour, pollutants such as formaldehyde, ammonia and many other common and chemical solvents such as paints and glues, or can be a by-product of mould growth. VOCs cause irritation to the eyes and or nose as well as causing headaches, nausea and even potential damage to the central nervous system.
OPERATION INSTRUCTIONS USING THE TOUCH CONTROLS • • • The controls respond to touch, so you don’t need to apply any pressure. Use the ball of your finger, not its tip. Make sure the controls are always clean, dry, and that there is no objects covering them. BEFORE FIRST USE: 1) Unpack the appliance.
HOW TO USE Indicator Light Fan Speed Button Reset Button Lock Button Timer Button Power Button POWER BUTTON FAN SPEED BUTTON LOCK RESET TIMER BUTTON Press to turn the appliance on and off. Press to change between the fan speeds. The current fan speed will be indicated next to the symbol: Low: Low Fan Speed High: High Fan Speed Auto: Fan speed will change depending on air quality Sleep: Low fan speed, and all lights are off. Press and hold for 5 seconds to initiate the WIFI connection.
AIR QUALITY INDICATOR The unit utilises a sensor to measure the air quality. This is then shown by the illumination of the fan on the top of the unit. When turning on the unit will take around 20 seconds before the colour stops changing and the air quality is shown. INDICATOR COLOUR Blue Green Purple Red AIR QUALITY PM INDEX Excellent Good Medium Bad 0-50 µg/m3 51-100 µg/m3 101-150 µg/m3 151+ µg/m3 ESSENTIAL OIL DIFFUSER The air purifier also contains an essential oil diffuser.
CONNECTING THE APPLIANCE TO WIFI DOWNLOAD THE APP TO YOUR PHONE Download the ”TUYA SMART” app, from your chosen app store, using the QR codes below, or by searching for the app in your chosen store. Android IOS CONNECTION METHODS AVAILABLE FOR SETUP The air purifier has two different setup modes, Quick Connection and AP (Access Point). The quick connection is a quick and simple way to set the unit up.
REGISTER THE APP 1. Press on the register button at the bottom of the screen. 4. A verification code will be sent by the method selected in step 3. Enter the code into the app. 2. Read the Privacy policy and press the Agree Button. 5. Type in the password you would like to create. This needs to be 6-20 characters, with letters and numbers. 12 3. Enter your email address or phone number and press continue to register. 6. The app is now registered.
SETTING UP YOUR HOME WITHIN THE APP TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses As such during the setup process, the app requires that different areas are created and named to allow easy management of all your devices. When new devices are added, they are assigned to one of the rooms you have created. CREATING ROOMS 1. Press on the ADD HOME button. 2.
CONNECTING USING QUICK CONNECTION Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing twice per second. If not follow the instructions for changing the connection mode. Also ensure your phone is connected to the WIFI network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4. Enter your WIFI password and press confirm. 2.
CONNECTING USING AP MODE (ALTERNATIVE METHOD) Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing slowly. If not follow the instructions for changing the WIFI connection mode. Also ensure your phone is connected to the WIFI network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4.
CONTROLLING YOUR APPLIANCE THROUGH THE APP THE HOME SCREEN Add Device: Add a device to the app, and go through the setup process. Change Home: If you have a number of units at different houses, you can change between them Room Management: Allows rooms to be added, removed or renamed.
DEVICE SCREEN The device screen is the main control screen for the air purifier, providing access to the controls to amend the functions and settings Back: Returns to the Home Screen Edit Name: Use to change the name of the air purifier.
SMART SCENES Smart Scenes is a powerful tool providing the option to customise the operation of the air purifier based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two categories Scene and Automation. SCENE Scene allows for a one touch button to be added to the Home screen. The button can be used to change a number of settings in one go, and can change all the settings within the unit.
AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, air quality of the room, weather conditions, and a range of other influences. 1. Press on the Smart Scene tab at the bottom of the Home screen 2. Press on the Plus in the top right corner to add a smart scene. 4. Setup is very similar to the scene setup on the previous page, and includes an extra section for specifying a trigger for the scene to start. 3.
PROFILE TAB The profile tab gives you the option to edit both your detail, and use the added features of the unit. CHANGING THE NAME OF YOUR DEVICE When in any of the device screens further settings for the device can be accessed, by pressing on the three dots in the top right hand corner. The top option within this allows you to change the name of the device to something relevant to the use of the product, such as “Living Room Air Purifier”.
CARE AND MAINTENANCE • Always shut off the unit and unplug from the mains before cleaning or performing any maintenance. • When the unit is not in use for long periods, it is advisable to remove the plug from the power socket. • Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage to the unit. • Do not assemble the unit and power it on before all the parts are completely dry.
CLEANING THE CASE • • • • Only use tepid water and a mild detergent on a soft cloth. Do not use bleach or abrasives. Do not splash water directly onto the main unit. Avoid wetting the power cable, doing so may cause an electric shock and can lead to the insulation deteriorating or unit to rust. CLEANING THE FILTERS AND FILTER HOLDING AREA • Hoover the filter gently every 2-3 weeks or more often if used in dusty environments.
TROUBLESHOOTING ISSUE CHECK Not working Ensure that the unit is plugged in, and that the filter and bottom cover are correctly fitted. Check if the filter is clean. Abnormal Smells Replace the filter. Pollutants not removed and loud noise when running Check if the filter is clean. Replace the filter Abnormally high Air Quality reading for prolonged period.
DISPOSAL Disposal: Do not dispose this product as unsorted waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils.
