User Manual

9
CONTROL PANEL
POWER
POWER BUTTON
Press to turn the appliance ON and OFF. The POWER indicator illuminates when the
unit is turned on, The RUN indicator will illuminate while the unit is dehumidifying and
the TANK FULL indicator will illuminate when the unit has stopped due to a full water
tank.
FAN SPEED
FAN SPEED BUTTON
Changes the fan speeds between High, Medium and Low. The corresponding
indicator will illuminate above to show the currently selected fan speed.
TIMER
TIMER BUTTON
The timer can be set in 2 hour increments between 2 hours and 14 hours. The
addition of the illuminated indicators shows the duration of the timer. i.e. if 2h and 4h
are illuminated, the timer is set to 6 hours.
WHILE RUNNING: Repeatedly press the TIMER button to set in how many hours
the unit will turn off. Note: If the water tank fills during operation of the timer, the
timer will stop until the water tank has been emptied, before resuming the
countdown.
WHILE IN STANDBY: Repeatedly press the TIMER button to set in how many
hours the unit will start. Note the unit will start with the previously used settings.
HUMIDITY
HUMIDITY BUTTON
Alternate between RH50%, RH60% and Contnuous. Once the humidity level falls
below the target of 50% or 60%, the unit will stop dehumidifying until the humidity
rises. The Continuous setting ensures the appliance will not stop dehumidifying and
is ideal for laundry in conjunction with the high fan speed.
IONISER
IONISER BUTTON
The ioniser button creates negative ions which cause floating particulates such as
dust, pet dander and allergens in the air to cling together removing them from the air.
FUNCTION
FUNCTION BUTTON
Here the swing function can be controlled, either swing or stop, stopping at any angle
within 70 degrees. The FUNCTION button is also used for configuring the WiFi
function.