User Manual

4
Always place the unit on a dry and
stable surface.
The appliance should not be installed in
a laundry or wet room where the
humidity is higher than 85% RH. This
unit should be operated at an ambient
temperature between 1°C and 32°C.
Do not dry laundry directly above the
unit. To prevent water from entering the
dehumidifier, laundry should be placed
at least 40 cm away from your
dehumidifier.
Do not place the unit next to heat
sources (e.g. electrical fires, fireplaces,
etc.)
Desiccant dehumidifiers tend to absorb
odours from the surrounding
environment like cigarettes, cooking,
cosmetics, new furniture etc. This smell
is described as a burning or sour smell.
This is released during operation as the
zeolite disc is heated. This is not a sign
of a fault and the smell will fade after
usage.
Do not store or use gasoline, petrol,
paint, solvents or other flammable
vapours and liquids in the vicinity of this
dehumidifier or any other appliance. Do
not use dehumidifiers where flammable
gases or VOC can be released or
accumulate. Avoid mishandling the
dehumidifier. Dropping, throwing the
unit can cause damage to its internals
and increases the risks of operating it.
The handle on the appliance is
designed to aid in its movement and
should not be used to support the full
weight of the dehumidifier. When
carrying the unit, it should be kept
upright and suifficiently supported from
its base.
Due to continuous product development
the layout and availability of features
within the app may vary.
ENERGY SAVING AND UNIT SAFETY
PROTECTION TIPS
Do not cover or restrict the airflow from
the outlet or inlet grills.
For maximum performance, the unit
should be operated at least 20 cm away
from walls and 50 cm from other objects
within the room.
Keep the filters and grills of the
appliance clean. Under normal
conditions, filters and grills should only
need cleaning once every three weeks
(approximately). Do not use the unit
without the mesh air filter as this will
allow dirt to gather inside the
dehumidifier, which could invalidate the
warranty.
A dirty filter will restrict the airflow into
the machine, which will increase the
resistance on the fan and could result in
damage and might invalidate the
warranty.
Since the filters remove airborne
particles, more frequent cleaning may be
necessary depending on the air quality.
Vacuum and wash the mesh filters with
hot soapy water and dry them before
placing them back in the unit.