Instruction Manual

7
CONTROL PANEL
POWER
POWER Button
Turn the appliance on/off
MODE
MODE Button
Select the function of the unit between: SMART and FAN modes. The LED’s
next to the button will show which mode is selected.
SMART MODE: The unit will default to SMART mode the first time it is
switched on and remains in this mode until another program is chosen. In
smart mode it will aim for a relative humidity of 50-55%.
AIR PURIFIER: Only the fan will run and water is not extracted. To be used
in conjunction with the optional filters. It can also be run without the filters to
work as a fan.
DEHUMIDIFY: The unit will remove moiseture from the air. The desired
humidity level can be set using the up and down buttons.
LAUNDRY: The dehumidifier will run continuously at high fan speed, to
remove the most moisture possible. This is ideal for drying clothes.
UP / DOWN
HUMIDITY SETTING
Press the UP and DOWN buttons to select the desired relative humidity
level, the default relative humidity is 55%. When a relative humidity of 35% is
selected, the compressor will not stop until the water tank is full.
SPEED
SPEED Button
Press the SPEED button to change the fan speed between HIGH and LOW.
The LED’s above the button will illuminate to indicate the currently selected
fan speed.
LOCK
LOCK Button
Press and hold the LOCK button for 3 seconds to activate the child lock. When
activated the lock indicator will be illuminated and no other buttons will be
functional. To turn off the lock, press and hold the LOCK button again.