User Manual

7
CONTROL PANEL
POWER
POWER Button
Turn the appliance on/off
MODE
MODE Button
Select the function of the unit between: SMART and FAN modes. The LED’s
next to the button will show which mode is selected.
SMART MODE: The unit will default to SMART mode the first time it is
switched on and remains in this mode until another program is chosen. In
smart mode it will default to aim for a relative humidity of 50-55%.
AIR PURIFIER: Only the fan will run and water is not extracted. To be used
in conjunction with the optional filters. It can also be run without the filters to
work as a fan.
UP / DOWN
HUMIDITY SETTING
Press the UP and DOWN buttons to select the desired relative humidity
level, the default relative humidity is 55%. When a relative humidity of 35% is
selected, the compressor will not stop until the water tank is full.
HUMIDITY
INDICATOR
HUMIDITY INDICATOR Button
When the appliance is started, the indicator light will turn on automatically.
The indicator light colour will change according to the humidity condition
RED: High humidity, RH≥70%
ORANGE: Above ideal humidity, 70%> RH ≥60%
GREEN: Ideal humidity, RH<60%
The ”Humidity Indicator” button can be pressed to turn on/off the indicator
light.
Note: It can take around 2 minutes after the humidity has changed into a
different colour bracket for the indicator will change the colour e.g. if humidity
drops to 55% may take 2 minutes before the indicator changes to green.