User Manual

SETTINGS

INITIAL SETUP

How to turn the TV on or off

1. Insert the power cord plug into an AC socket..

2. If TV is in standby mode, press POWER button on

the remote control or press the joystick on the rear of the TV.

3. The picture will be displayed on the screen after 15

seconds. If no signal input, "No Signal" will be displayed on the screen.

4. If temporary POWER off is required, press POWER button on the remote control or press the

joystick on the rear of the TV.

5. If you want to completely switch off the power for this unit, unplug the power cord plug for this

unit, after putting the TV into standby using the remote or joystick on the rear of the TV.

6. After switching off the unit, you should wait at least 5 seconds before switching on again.

Status indication lamp

Green: In power on mode

Red: In standby mode

Auto power-off

1. If there is no signal, the TV will automatically enter standby mode after 10 minutes of inactivity..

2. In VGA mode, if there is no input for 15 seconds, the TV will enter standby mode.

Memory before turning TV off

The picture and sound settings and preset channels will be memorized at the point when the TV is

turned off. When the TV is started up again it will work according to the previous settings.