43 inch UHD TV eiq-43UHDT2SMH
CONTENTS WHAT’S INCLUDED--------------------------------------------------------------------------------------------------- 4 TV STAND INSTALLATION/REMOVAL-------------------------------------------------------------------------- 5 GETTING STARTED--------------------------------------------------------------------------------------------------- 6 CONNECTING TO EXTERNAL DEVICES----------------------------------------------------------------------- 7 REMOTE CONTROL---------------------------------------------
SAFETY INFORMATION l Read these instructions – All the safety and operating instructions should be read before this product is operated. l Keep these instructions – The safety and operating instructions should be retained for future reference. l Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. l Follow all instructions – All operating and usage instructions should be followed.
SAFETY INFORMATION l Do not tap or shake the TV screen, this may damage internal components. l WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus. l WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.
WHAT’S INCLUDED Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
TV STAND INSTALLATION/REMOVAL Wall mounting instructions (optional) Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket (not supplied with LED TV, please contact your local hardware store) and the mounting holes on the back of the unit. We recommend removing the TV stand prior to wall mounting the TV. Please see previous page for instructions on removing the stand. 1. Wall 2. Nylon sleeve 3. Wall-mounting bracket 4. Self-tapping screw 5. Wall-mounting screw 6.
GETTING STARTED JOYSTICK FUNCTIONS The joystick on the lower-left panel behind the TV will control the basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Directly in front the TV operation schematic diagram： 1 Joystick The control panel on the back shell 6 2 3 4 1 5 Press this button on the control panel one time as CONFIRM at within menu. Centre Press and hold this button to display FUNCTION menu.
CONNECTING TO EXTERNAL DEVICES You can connect the TV with video devices such as a DVD player, VCR or a video camera to enjoy a high quality picture.
REMOTE CONTROL Input OK List REC List TV More Guide HOME Menu SMART Back Mute VOL CH Audio Lang I/II RED GREEN YELLOW BLUE 1 2 3 4 5 6 7 8 9 Info 0 Recall / TEXT Aspect / Sleep Sound Picture Subtitle 1. INPUT: This button is used to switch among different sources: DTV, ATV, AV, YPbPr, VGA, HDMI1, HDMI2, HDMI3. Select a source and press OK button to confirm. 2. POWER: Press this button to switch to standby mode, and press it again to turn TV on. 3.
REMOTE CONTROL Input OK List REC List TV More Guide HOME Menu SMART Back Mute VOL CH Audio Lang I/II RED GREEN YELLOW BLUE 1 2 3 4 5 6 7 8 9 Info 0 Recall 17. Digital buttons(0~9): To select channel with digital buttons. 18.INFO: This button is used to display source information or current program information. 19. RECALL: Switch to the previous program. 20. : Use as rewind function in USB Video/Audio playing Mode. Use as reveal function in ATV Text Mode. 21.
BATTERY INSTALLATION Installing Batteries 1 Open the battery compartment cover on the back side. 2 Insert two 1.5V AAA size batteries in correct polarity. Don´t mix old or used batteries with new ones. Input OK List REC List TV More Guide HOME Menu 3 SMART Back Point the remote towards the remote control sensor of the TV and use it within 8 meters. Replace the cover. NOTES: • Once installed, of batteries will last for 1 year under normal use.
SETTINGS INITIAL SETUP How to turn the TV on or off 1. Insert the power cord plug into an AC socket.. 2. If TV is in standby mode, press POWER button on the remote control or press the joystick on the rear of the TV. 3. The picture will be displayed on the screen after 15 seconds. If no signal input, "No Signal" will be displayed on the screen. 4. If temporary POWER off is required, press POWER button on the remote control or press the joystick on the rear of the TV. 5.
BASIC OPERATION Setup Wizard When the TV is started for the first time, it will automatically enter the TV guide system. OSD Language Setting English START 1. Press ▲/▼ key to select the language. 2. Press ► key then press the “START” button to continue to setup. Country Setting Setup your country Algeria Australia Austria NEXT STEP 1. Press ▲/▼ key to select your country (Algeria/Australia/Austria). 2. Press ► key then press the “NEXT STEP” button to go to the next step.
Network Settings Setup your network Skip Wireless Wired NEXT STEP 1. Press ▲/▼ key to select the method of connection to your network(Skip/wired/wireless). 2. Press ► key then press “NEXT STEP” button to enter the next step. Wireless Connection (WiFi) 1. Wait around 5 - 10 seconds for the list of available networks to be displayed. 2. Press ▲/▼ key to select the network to connect to. 3. Select WIFI 4. Enter password and click “Connect”.
Wired Connection Setup wired network DHCP STATIC NEXT STEP 1. Press ▲/▼ key to select the wired connection type ( DHCP/STATIC). 2. Press ► key then press “NEXT STEP” button to enter the next step. If "DHCP" is selected, click "NEXT STEP", The connection is set-up automatically, then click Finish. Selecting "STATIC" allows the user to manually enter the IP address and default gateway. Once this has been entered click on "Set".
Explanation of Network types: DHCP: The connection information is automatically assigned by your router, enabling a quick connection. STATIC: Allows manual entry of IP address and other network settings if known. In the majority of circumstances we would advise for the DHCP option to be selected. QUICK MENU Quick Menu Image Sound PVR Option CEC Program Edit Audio Language Subtitle Language No Signal When viewing live TV, there is a Quick Menu to allow alteration of the most commonly changed settings.
SMART MENU OPERATION Accessible by pressing the SMART button on the remote Arrow buttons: Select an item on the menu. OK button: Enter the options which you've selected. 1. Google Search 2. Current Time 3. What's hot: Popular videos from the Internet. 4. Featured app: Featured apps on Internet for TV. 5. Inputs: Input sources on TV(DTV, ATV, AV, YPbPr, VGA, HDMI1, HDMI2, HDMI3). 6. Apps: All applications installed on the TV. 7. System Settings: All Setting Options on the TV. 8.
SYSTEM SETTINGS MENU Main Menu This is accessible through the settings cog on the SMART MENU. This gives access to change the settings for all the TV's functions TV TV Image Sound Channel Function Network System sounds Manage apps Display Device Storage & reset Image: Allows the screen settings for the TV to be changed. More in depth information can be found in the "IMAGE SETTINGS MENU" Section Sound: Allows the sound settings for the TV to be changed.
Network: Configure Network Settings; System sounds: Configure sound settings for SMART mode; Manager Apps: Management; Display: Configure display settings for SMART mode; Storage & Reset: Gives storage information and option to reset SMART features to factory defaults; Update: System Upgrade; About: System info; Retail mode: Retail mode (Use for retail store); PREFERENCES Date & time: You can make the adjustment to the date and time; Language: You can change the language that is displayed; Keyboard: Confi
PERSONAL Location: Use network to provide location information; Security & Restrictions: Security settings for SMART feature; 19
IMAGE SETTINGS MENU Picture Mode Picture Mode Standard BackLight 100 Aspect Ratio 16:9 Noise Reduction Low Colour Temp Cool No Signal BACK Back MENU Exit Your TV has these picture settings (Soft, Vivid, User, Dynamic, Standard) that are preset from the factory. Only “User” mode can be set to your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness, Tint. 1. Press ▲/▼ key to select “Picture Mode” option. 2. Press ◄/► key to select one picture mode.
SOUND SETTINGS MENU Sound Mode Sound Mode Standard Equalizer Balance 0 Auto Volume Off Surround Off SPDIF Mode PCM HDMI Sound HDMI AD On No Signal BACK Back MENU Exit You can adjust the type of sound settings to be used when watching a given broadcast. Your TV has five sound settings ("Standard", "Music", "Movie", "Sports", "User") Standard: Selects the normal sound mode. Music: Select the sound mode for music. Movie: Provides live and full sound for movies.
1. Press ▲/▼ key to select an equalizer item. 2. Press OK key to enter the equalizer submenu. The sound settings can be adjusted to suit your user preferences. 1. Press ▲/▼ key to select a particular item. 2. Press◄/►key to decrease or increase the value of a particular item. Note: The adjusted values are stored according to the selected particular item. Balance If the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference. 1.
CHANNEL SETTINGS MENU Antenna Type Antenna Type DVB-T/T2 Auto Tuning ATV Manual Tuning DTV Manual Tuning Program Edit OAD Off OAD Scan CI Information BACK Back No Signal MENU Exit 1. Press ▲/▼ key to select "Antenna Type" option. 2. Press ◄/► key to select the type of antenna: DVB-C (Cable), DVB T/T2 (Freeview), DVB-S(Freesat).
DVB-S Option Satellite EUTELSAT 7A Transponder 10721 H 220.. Scan Mode Free+Scra.. Service Type DTV+Radio Tune Option Blind Scan Start Search No Signal ATV Manual Tuning ATV Manual Tuning ATV Manual Tuning 62.25MHZ 62.25MHZ 1 Fine Tune Start Search Fine Tune Color System PAL Sound System BG Skip Off In the ATV/DTV source, you can choose "ATV Manual Tuning" to enter "ATV Manual Tuning" menu.
DTV Manual Tuning DTV Manual Tuning 0 EUTELSAT 7A Ku Polarization Vertical Pos.. Scan Mode Free Service Type DTV Frequency 394 Symbol Rate 6875 LNB Setting START SEARCH Signal Strengh: Signal Quality: 0 DTV: 0 RADIO: No Signal 0 DATA: In the ATV/DTV source, you can choose "DTV Manual Tuning" to enter "DTV Manual Tuning"menu. If the Antenna Type is DVB-C, you can use ◄/►button to choose the Frequency.
Program Edit Program Edit 1 ATV 2 ATV 3 ATV 4 ATV 5 ATV 6 ATV 7 ATV 8 ATV 9 ATV 10 ATV No Signal OK Delete Skip Fav Lock Move You can use ▲/▼ button to choose "Program Edit" and enter the menu, press the colour button on the remote control to skip, delete and lock programs, or add programs to your favorite list. Delete: You can press the RED button to delete the selected channel, then choose the channel you want to delete and press the RED button again to delete.
Signal Information (Used only in DTV) Signal Information Sof tware Version 1 Channel 37 Frequency 592 Nine Melb Network Transport stream 1072 Service 1074 Modulation 64QAM Signal Strengh: Signal Quality: 1. Press ▲/▼ key to select "Signal Information" option. 2. Press "OK" or ► key, you can see the information of the DTV channel.
FUNCTION SETTINGS MENU Lock System PVR Option CEC OSD Time 15 Seconds Screen Saver Off No signal standby On No Signal BACK Back MENU Exit OSD Time: Set the preferred amount of time for the OSD to be displayed on the screen. Lock (Optional) Lock System On Parental Control Off Set Password No Signal BACK Back MENU Exit 1. Press “Enter” key to select "System Lock" submenu. 2. Press ◄/► key to select "On" or "Off".
Set Password Lock System On Parental Control Off Input Password: Set Password Old Password New Password Comfirm Password No Signal Back BACK MENU Exit 1. Press “OK” key to select "Set Password" option. 2. Enter your 4-digit password to set the old password. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor ill skip to “Confirm password” item, re-enter the same 4 digits, and your new password has been memorized.
Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control up-to 15 CEC - enabled devices ,that are connected through HDMI, by using only one of their remote controls (for example by controlling a television set, set-top box, and DVD player using only the remote control of the TV). 1. Press ▲/▼ button to select “CEC” option. 2. Press OK button to enter “CEC” setting submenu. This option is used to enable or disable CEC. 1. Press ▲/▼ button to select “CEC” option.
CEC Control CEC On Auto Standby Off Auto Power on On ARC On CEC Control Power Root Menu CEC Control Setup Menu Device List Menu No Signal BACK Back MENU Exit This option enables the TV to control the device linked to it. 1. Press ▲/▼ button to select “CEC Control” option. 2. Press OK button to enter the “CEC Control” submenu. Power 1. Press ▲/▼ button to select “Power” option. 2. Press OK button to power off the device linked to the TV. Root Menu 1.
Screen Saver This option is only used in ATV mode. 1. Press ▲/▼ button to select “Screen Saver” option. 2. Press ◄/► button to select “On” or “Off”. HDMI Edid Mode (Optional) This option is only used in HDMI mode. 1.Press ▲/▼ button to select “HDMI Edid Mode” option. 2.Press ◄/► button to switch HDMI Edid Version.
TIMER Device Timers On timer Off timer Sleep timer off 33
On Timer Timers On timer On timer Off Time 12:30 PM Inputs DTV In "On Timer” item, press OK button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can set a desired source to be displayed automatically when you start TV in "Source" menu. Off Timer In "Off Timer" item, press OK button to enter the submenu, set the time to turn off the TV set.
Sleep Timer Timers Sleep timer Off 10 minutes 20 minutes 30 minutes 60 minutes 1. Press ▲/▼key to select "Sleep Timer" option. 2. Press ◄/► key repeatedly until the desired time appears (Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min). Notes: 1. The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs 2. When the time is up, remind information will be displayed on screen. Press any key button to cancel the timer function. Audio Language 1.
PVR WARNING: 1. Before connecting your USB device to the TV, please back up your files to prevent data loss. 2. A USB disk must be formatted when first used for the PVR. Any existing data on the disk will be lost during the formatting process. Please back up your disk if you do not want to lose this data. You are recommended to use a dedicated disk for PVR use only. Do not disconnect the disk or power during formatting. 3. Do not modify PVR files on a PC.
Instant recording 1. Select the desired channel then press the ●button on the remote control to start recording the current broadcast, a progress bar will be displayed at the bottom of the screen. 2. Recording stops when you press the BACK button and the recorded file is stored in the external USB device automatically. Note: You can only watch channels on the same frequency as the program being recorded.
DTV DTV EPG (Electronic Program Guide) Add record Channel CH 9 Minute Nine Digital 56 Hour 3 Period PM Month 1 Date 18 End time Minute 0 Hour 4 Period PM Month 1 Date 18 Repeat Once Ok OK In DTV mode, press "GUIDE" button to enter the Electronic Program Guide. Within the Guide menu, press the "RED" button bring up the Add record menu, allowing changes to be made to the recording time before pressing OK to schedule the recording.
TROUBLESHOTING If you have any problem, check the solutions for each symptom listed below. The following symptoms may have been. caused by inappropriate adjustment rather than actual malfunction of the unit. If the trouble persists, contact the Customer Care Centre, see back page for contact details. Symptoms Possible solutions No power Please check the power cord is plugged in and that the power outlet works. Unplug the power cord and plug it in after 60 seconds and restart the TV.
After Auto Tuning only some channels are available Check your area is covered by Digital Video Broadcasts. Try re-tuning or manually tuning missing channels. Check that you are using the correct antenna type. Channel cannot be selected Check if the channel has been blocked in the main menu settings. USB not playing Please check connecting USB cable and power supply is connected. Hard drive has not been formatted. Please make sure USB disk is compatible and the multimedia data formats are supported.
SPECIFICATIONS Model eiq-43UHDT2SMH Display size 43" Diagonal (max.) LED panel resolution 3840X2160 Speaker output power ≥5WX2 Power supply 100-240V~, 50/60Hz TV receive system Digital: DVB-T/T2, DVB-C, DVB-S/S2 Analog: PAL: BG, I, DK, SECAM: BG, D/K Frequency range Analog: Antenna: 46.25MHz-855.25MHz Digital： DVB-T/T2: 5-12,21-69 DVB-C: 113MHz~898MHz DVB-S/S2: 950MHz-2150MHz Video in PAL/NTSC/SECAM Power consumption 75W Standby comsumption ≤0.
SUPPORING SIGNALS Input Mode DTV Digital: DVB-T/T2, DVB-C, DVB-S/S2 Input SECAM BG DK CVBS Input PC/VGA Resolution 640x480 800X600 1024X768 1280X1024 SXGA 1360X768 1920X1080 VGA SVGA XGA Vertical Frequency 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz Resolution Vertical Frequency 60Hz 60Hz 50Hz 50Hz 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz 60Hz 50Hz 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz 480i 480p 576i Component 576p 720p 1080i 1080p 480p 576p 720p HDMI 1080i 1080p 3840x2160 24Hz/25Hz/30Hz/60Hz This TV is embedded with one digita
electriQ UK SUPPORT Complete online support form on www.electriQ.co.uk/support Service Line: 0871 620 1057 Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.
