Operation Manual

BNET (a BSX ™ Product) Operation Manual
Office: 972 (0) 73-3354727 Fax : [phone] Page 16 of 17
4.2.2. BNET VEHICULAR POWER UP
To power up the BNET Vehicular, perform the following steps:
a. Turn on power supply that provide 24v
NOTE
Make sure that the voltage indication indicates 24v ± 6V Dc (1).
Make sure that the current indication indicates 10A± 3A (3).
NOTE
If voltage indication does not indicate 24v, turn the
Rotary control (2) to the required position.
b. Power up the BNET Vehicular by setting the switch to
on (1). Result: Green light appears (2).
Figure 4- 2: BNET Vehicular