Operation Manual

BNET (a BSX ™ Product) Operation Manual
Office: 972 (0) 73-3354727 Fax : [phone] Page 15 of 17
4.2.1.2. BNET Maintenance Deployment
a. Install power cable connector on PWR J9 connector (2).
b. Connect GPS antenna connector to J8 connector (1).
c. Connect attenuator (if needed) to the UHF antenna.
d. Power up the power supply and the BNET vehicular according to section 4.2.2
e. Connect UHF antenna connector to J2 connector (3).