AMSTERDAM ROYAL FRONT GENERATOR LIGHT SET-UP WWW.ELECTRABIKE.
AMSTERDAM ROYAL FRONT GENERATOR LIGHT SET-UP STEP 1: WIRING OF FRONT LIGHT • LOCATE SOLID BLACK WIRE WITH WIRE EXPOSED END (power wire) • THEN DEPRESS BLACK CONNECTOR ON FRONT LIGHT AND INSERT EXPOSED END OF SOLID BLACK WIRE INTO CONNECTOR STEP 2: GROUNDING AND ATTACHMENT OF FRONT LIGHT • LOCATE BLACK/ WHITE STRIPED WIRE WITH BRASS EYE CONNECTOR (ground wire) • NEXT PLACE BRASS EYE CONNECTOR BETWEEN HEX HEAD BOLT HEAD AND BRACKET.
AMSTERDAM ROYAL FRONT GENERATOR LIGHT SET-UP = NEGATIVE = POSITIVE STEP 3: WIRING AND ATTACHMENT OF FRONT GENERATOR • LOCATE WIRE GENERATOR PLUG BLOCK • NOTE ON THE SIDE OF WIRE GENERATOR PLUG BLOCK THERE IS FOR POSITIVE TERMINALS AND A FOR NEGATIVE TERMINALS SIGNALING STEP 4: WIRING AND ATTACHMENT OF FRONT GENERATOR CONTINUED • LOCATE SOLID BLACK WIRE WITH WIRE EXPOSED END (power wire) AND INSERT INTO POSITIVE TERMINAL HOLE OF GENERATOR PLUG BLOCK • NEXT, LOCATE THE BLACK/ WHITE STRIPED WIRE WITH WIRED
