Data Sheet

Guide V1.0
Email: [e-mail] Web: www.elecrow.com ---Designed by Elecrow Keen
53
40P GPIO Cable
1
Breadboard
1
Jumper wires
Several
Connection diagram
Note： Please view Pin definition.
Connection
RPI IR Receiver
GPIO21 -> OUT
GND -> GND
5V0 -> VCC
Compile and Run
Open terminal and install the LIB of lirc, run:
git clone https://github.com/Elecrow-keen/Elecrow-lirc-setup.git
cd Elecrow-lirc-setup
sudo ./setup
And next, open the lesson of IR-Remote, compile and run.
Tips: