Data Sheet

Guide V1.0
Email: [e-mail] Web: www.elecrow.com ---Designed by Elecrow Keen
40
Lesson 16: Flame Sensor
Overview
The flame sensor can be used to detect fire or other wavelength at 760 nm ~
1100 nm light. In the fire-fighting robot game, the flame plays an important
role in the probe, which can be used as the robot's eyes to find fire source or
football. It can make use of fire-fighting robots, soccer robots.
The flame sensor's operating temperature is -25 degrees Celsius to 85 degrees
Celsius.
Specification
Null
Pin definition
Hardware required
Material diagram
Material name
Number
Flame sensor
1
10KΩ resistor
1
PCF8591
1
Raspberry Pi Board
1
T-Cobbler Plus
1
40P GPIO Cable
1
Breadboard
1
Jumper wires
Several