Data Sheet

Guide V1.0
Email: [e-mail] Web: www.elecrow.com ---Designed by Elecrow Keen
4
Step 3: Circuit connection
Because it is using the wiringPi library, the pins have been re-layout. The pins
on the “T- Cobbler Plus” is basic for BCM which is different from wPi, please
refer the “wPi” number.
Connection:
RPI LED
GPIO17 Long pin
GND Short pin
Step 4: Open Terminal and Download the Demo code
Run:
git clone https://github.com/Elecrow-keen/Basic-Starter-Kit.git