Data Sheet

Guide V1.0
Email: [e-mail] Web: www.elecrow.com ---Designed by Elecrow Keen
3
Operation demo
Step 1: Download and install wiringpi
Tips: Most of the Rapbian versions have been preloaded with wiringPi, and the
test methods are as follows:
Open terminal and run: gpio -v
If you get something, then you have it already installed.
If not, please refer it:
http://wiringpi.com/download-and-install/
Step 2: Hardware required
Material diagram
Material name
Number
220/330Ω resistor
1
LED
1
Raspberry Pi Board
1
T-Cobbler Plus
1
40P GPIO Cable
1
Jumper wires
Several
Breadboard
1