Data Sheet

SIM900 AT Commands Set
SIM900R01_ATC_V1.00 65 15.01.2010
Response
+CMEE: <n>
OK
Read Command
AT+CMEE?
Parameters
See Write Command
Response
TA disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME.
OK
If error is related to ME functionality:
+CME ERROR:<err>
Write Command
AT+CMEE=[<n>
]
Parameters
<n> 0 Disable +CME ERROR: <err> result code and use
ERROR instead.
1 Enable +CME ERROR: <err> result code and use
numeric
<
err >
2 Enable +CME ERROR: <err> result code and use
verbose
<
err > values
Reference
GSM 07.07 [13]
Note
3.2.21 AT+COLP Connected Line Identification Presentation
AT+COLP Connected Line Identification Presentation
Response
+COLP: <n>,<m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+COLP?
Parameters
See Write Command
Response
+COLP: (list of supported <n>s)
OK
Test Command
AT+COLP=?
Parameters
See Write Command