Data Sheet

SIM900 AT Commands Set
SIM900_ATC_V1.00 182 15.01.2010
AT+CIPSRIP?
+CIPSRIP: <mode>
OK
Parameter
See Write Command
Write Command
AT+CIPSRIP=<
mode>
Response
OK
ERROR
Parameter
<mode> a numeric parameter which indicates whether show the
prompt of where the data received are from or not before
received data.
0 do not show the prompt
1 show the prompt, the format is as follows: RECV
FROM:<IP ADDRESS>:<PORT>
Note that the default mode is not to show the prompt.
Reference Note
8.2.21 AT+CIPMODE Select TCPIP Application Mode
AT+CIPMODE Select TCPIP Application Mode
Test Command
AT+CIPMODE=
?
Response
+CIPMODE 0-NORMAL MODE,1-TRANSPARENT MODE)
OK
Read Command
AT+CIPMODE?
Response
+CIPMODE: <mode>
OK
Parameter
See Write Command
Write Command
AT+CIPMODE=
<mode>
Response
OK
ERROR
Parameter
<mode> 0 normal mode
1 transparent mode
Reference Note