Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 81 2015-08-03
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<stat> 0 Unknown
1 Operator available
2 Operator current
3 Operator forbidden
<oper>
Refer to [27.007]
operator in format as per <format>
<mode> 0 Automatic mode; <oper> field is ignored
1 Manual (<oper> field shall be present, and <AcT>
optionally)
2 manual deregister from network
3 set only <format> (for read Command +COPS?) - not
shown in Read Command response
4 Manual/automatic (<oper> field shall be present); if
manual selection fails, automatic mode (<mode>=0) is
entered
<format> 0 Long format alphanumeric <oper>
1 Short format alphanumeric <oper>
2 Numeric <oper>; GSM Location Area Identification
number
Parameter Saving
Mode
AUTO_SAVE
Max Response
Time
Test command: 45 seconds
Write command: 120 seconds
Reference
3GPP TS 27.007
[14]
Note
3.2.23 AT+CPAS Phone Activity Status
AT+CPAS Phone Activity Status
Response
+CPAS: (list of supported <pas>s)
OK
Test Command
AT+CPAS=?
Parameters
See Execution Command
Execution
Command
AT+CPAS
Response
TA returns the activity status of ME.
+CPAS: <pas>