Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 78 2015-08-03
Response
+CMEE: (list of supported <n>s)
OK
Test Command
AT+CMEE=?
Parameters
See Write Command
Response
+CMEE: <n>
OK
Read Command
AT+CMEE?
Parameters
See Write Command
Response
TA disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME.
OK
If error is related to ME functionality:
+CME ERROR:<err>
Write Command
AT+CMEE=[<n>
]
Parameters
<n> 0 Disable +CME ERROR: <err> result code and use ERROR
instead.
1 Enable +CME ERROR: <err> result code and use numeric
<err>
2 Enable +CME ERROR: <err> result code and use verbose
<err> values
Parameter Saving
Mode
AT&W_SAVE
Max Response
Time
-
Reference
3GPP TS 27.007
[13]
Note
3.2.21 AT+COLP Connected Line Identification Presentation
AT+COLP Connected Line Identification Presentation
Response
+COLP: (list of supported <n>s)
OK
Test Command
AT+COLP=?
Parameters
See Write Command
Read Command Response