Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 38 2015-08-03
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference
V.25ter
Note
No effect in GSM
2.2.15 ATQ Set Result Code Presentation Mode
ATQ Set Result Code Presentation Mode
Response
This parameter setting determines whether or not the TA transmits any result
code to the TE. Information text transmitted in response is not affected by
this setting.
If <n>=0:
OK
If <n>=1:
(none)
Execution
Command
ATQ<n>
Parameters
<n> 0 TA transmits result code
1 Result codes are suppressed and not transmitted
Parameter Saving
Mode
AT&W_SAVE
Max Response
Time
-
Reference
V.25ter
Note
2.2.16 ATS0 Set Number of Rings before Automatically Answering the Call
ATS0 Set Number of Rings before Automatically Answering the Call
Response
<n>
OK
Read Command
ATS0?
Parameters
See Write Command
Response
This parameter setting determines the number of rings before auto-answer.
OK
ERROR
Write Command
ATS0=<n>
Parameters