Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 351 2015-08-03
+CDS:
<fo>,<mr>[,<ra>][,<tora>],<s
cts>,<dt>,<st>
Indicates that new SMS status report has
been received.
AT+CNMI
<ds>=1 (text mode
enabled):
+COLP:
<number>,<type>[,<subaddr>
,<satype>,<alphaId>]
The presentation of the COL (Connected
Line) at the TE for a mobile originated
call.
AT+COLP= 1
+CSSU: <code2> Presentation status during a mobile
terminated call setup or during a call, or
when a forward check supplementary
service notification is received.
AT+CSSN=<n>[,<
m>]<m>=1
+CSSI: <code1>[,<index>] Presentation status after a mobile
originated call setup
AT+CSSN=<n>[,<
m>]<n>=1
+CLCC:
<id1>,<dir>,<stat>,<mode>,<
mpty>[,<number>,<type
>,<alphaID>]
[<CR><LF>+CLCC:
<id2>,<dir>,<stat>,<mode>,<
mpty>
[,<number>,<type>,<alphaID
>][...]]
Report a list of current calls of ME
automatically when the current call
status changes.
AT+CLCC= 1
*PSNWID: "<mcc>",
"<mnc>", "<full network
name>",<full network name
CI>, "<short network
name>",<short network name
CI>
Refresh network name by network.
*PSUTTZ:
<year>,<month>,<day>,<hour
>,<min>,<sec>, "<time
zone>",<dst>
Refresh time and time zone by network.
+CTZV: "<time zone>"
Refresh network time zone by network.
DST: <dst>
Refresh Network Daylight Saving Time
by network.
AT+CLT S=1
+CSMINS: <n>,<SIM
inserted>
Indicates whether SIM card has been
inserted.
AT+CSMINS=1
+CDRIND: <type>
Indicates whether a CS voice call, CS
data has been terminated.
AT+CDRIND=1
+CHF: <state>
Indicates the current channel. AT+CHF=1
+CENG:
<cell>,"<arfcn>,<rxl>,<rxq>,
<mcc>,<mnc>,<bsic>,<cellid
>,<rla>,<txp>,<lac>,<TA>"
Report of network information.
AT+CENG=<mod
e>[,<Ncell>]
<mode>=2
MO RING
Shows call state of mobile originated