Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 265 2015-08-03
12 AT Commands for FTP Application
SIM800 series has an embedded TCP/IP stack that is driven by AT commands and enables the
host application to easily access the Internet FTP service. This chapter is a reference guide to all
the AT commands and responses defined for using with the TCP/IP stack in FTP Service.
12.1 Overview
Command Description
AT+FTPPORT Set FTP control port
AT+FTPMODE Set active or passive FTP mode
AT+FTPTYPE Set the type of data to be transferred
AT+FTPPUTOPT Set FTP put type
AT+FTPCI D Set FTP bearer profile identifier
AT+FTPRE ST Set resume broken download
AT+FTPSERV Set FTP server address
AT+FTPUN Set FTP user name
AT+FTPPW Set FTP password
AT+FTPGETNAME Set download file name
AT+FTPGETPATH Set download file path
AT+FTPPUTNAME Set upload file name
AT+FTPPU TPAT H Set upload file path
AT+FTPGET Download file
AT+FTPPUT Set upload file
AT+FTPSCONT Save FTP application context
AT+FTPDELE Delete specified file in FTP server
AT+FTPSIZE Get the size of specified file in FTP server
AT+FTPSTAT E Get the FTP state
AT+FTPEXTPUT Extend upload file
AT+FTPMKD Make directory on the remote machine
AT+FTPRM D Remove directory on the remote machine
AT+FTPLIST List contents of directory on the remote machine
AT+FTPGETTOFS Download file and save in file system
AT+FTPPUTFRMFS Upload file from file system
AT+FTPEXTGET Extend download file
AT+FTPFILEPUT Load file in RAM from file system then upload with FTPPUT
AT+FTPQUIT Quit current FTP session