Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 246 2015-08-03
+CIPDPDP: <mode>, <interval>, <timer>
+CIPRXGET: <mode>
+CIPRDTIMER: <rdsigtimer>,<rdmuxtimer>
OK
Parameters
<mode0> 0 Saved, the value from NVRAM
1 Unsaved, the value from RAM
For other parameters, see the related command.
Execution
Command
AT+CIPSCONT
Response
Module saves current TCPIP Application Contexts to NVRAM. When
system is rebooted, the parameters will be loaded automatically.
OK
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
8.2.28 AT+CIPRDTIMER Set Remote Delay Timer
AT+CIPRDTIMER Set Remote Delay Timer
Response
+CIPRDTIMER: (100-4000),(100-7000)
OK
Test Command
AT+CIPRDTIM
ER=?
Parameters
See Write Command
Response
+CIPRDTIMER: <rdsigtimer>,<rdmuxtimer>
OK
Read Command
AT+CIPRDTIM
ER?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CIPRDTIM
ER=<rdsigtimer
>,<rdmuxtimer>
Parameters