Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 237 2015-08-03
Mode
Max Response
Time
-
Reference Note
This command is allowed to establish a TCP server only when the state is IP
INITIAL or IP STATUS when it is in single state. In multi-IP state, the state
is in IP STATUS only.
8.2.19 AT+CIPCSGP Set CSD or GPRS for Connection Mode
AT+CIPCSGP Set CSD or GPRS for Connection Mode
Response
+CIPCSGP:0-CSD,DIALNUMBER,USER
NAME,PASSWORD,RATE(0-3)
+CIPCSGP: 1-GPRS,APN,USER NAME,PASSWORD
OK
Test Command
AT+CIPCSGP=?
Parameters
See Write Command
Response
+CIPCSGP: <mode>, <apn>, <user name>, <password>[,<rate>]
OK
Read Command
AT+CIPCSGP?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CIPCSGP=<
mode>[,
(<apn>,<user
name>,
<password>),(<d
ial
number>,<user
name>,<passwor
d>,<rate>)]
Parameters
<mode> A numeric parameter which indicates the wireless connection
mode
0 set CSD as wireless connection mode
1 set GPRS as wireless connection mode
GPRS parameters:
<apn> A string parameter which indicates the access point name
<user name> A string parameter which indicates the user name
<password> A string parameter which indicates the password CSD
parameters:
<dial number> A string parameter which indicates the CSD dial numbers
<user name> A string parameter which indicates the CSD user name
<password> A string parameter which indicates the CSD password
<rate> A numeric parameter which indicates the CSD connection
rate