Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 137 2015-08-03
>]
Parameter
<command> HEX String --specified in GSM11.14[13.1]
- 'D3' = Menu Selection;
- 'D6' =Event download;
<data> Hex String
If command is ‘D3’ --specified in GSM11.14[8.2]
-Item identifier of main menu
If command is ‘D6’ --specified in GSM11.14[11]
-event list
- '04' = User activity
- '05' = Idle screen available
- '07' = Language selection
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
For more detail used, can refer AT+STKENV command
5.2.3 AT+STKCALL STK call setup
AT+STKCALL STK call setup
Response
OK
Test Command
AT+STKCALL=?
Parameter
See Write Command
Write Command
AT+STKCALL=<
command>
Response
OK
ERROR
Parameter
<command> stk call command
0 Trigger modem to send STK CALLSETUP
4 Trigger modem to send STK CALLSETUP but icon cannot
be displayed
16 Proactive session terminated by user
18 No response from user
32 ME currently unable to process this command
34 User reject setup call
50 Command data not understood by ME
Note: Above are the possible terminal response value needed to be
responded by application. It’s modem’s responsibility to response for other
terminal response value.
Parameter Saving
Mode
NO_SAVE