User Manual

Power supply x1
Screwdriver x1
Infrared remote control x1
IR receiver x1
Manual x1
RFID white card + tag x1
Crowtail -moisture sensor(with cable) x1
Components Pack x1
2.4G wireless mouse x1
Stepper motor & Servo x1
TF Card Reader x1
Motor + small fan x1
1. Joystick
2. Segment LED
3. Relay
4. Cooling fan
5. Switch converts connection between sensors
and Raspberry Pi
6. GPIO pin socket
7. GPIO indicate LED
8. DHT11 temperature and humidity sensor
9. Breadboard
10. Tilt sensor
11. Hall sensor
12. PIR motion sensor
13. PIR sensitivity adjustment
14. Sound sensor
15. IR receiver
16. I/O/ADC/UART extension port
17. IIC port
18. 9G servo
19. Stepper motor
20. LCD1602 display
21. 4x4 button matrix
22. Buzzer
23. Vibration motor
24. Touch sensor
25. 8x8 RGB matrix
26. RC522 RFID sensing part
27. Moisture sensor
28. Light sensor
29. Ultrasonic sensor
30. Screen driver
31. Basic components pack
32. LCD1602 brightness adjustment
33. Sound sensor sensitivity adjustment
Module list:
Conventional accessories:
5