Data Sheet

iEthernet W5200

is observed when SEND command is performed at the

SOCK_UDP or SOCK_IPRAW, or CONNECT command is

performed at the SOCK_INIT.

If hardware address is successfully acquired from

destination (when ARP-response is received), it is changed

to SOCK_UD

P, SOCK_IPRAW or SOCK_SYNSENT. If it's failed

and ARPTO occurs (Sn_IR(TIMEOUT)=‘1’), in case of UDP or

IPRAW mode it goes back to the previous status(the

SOCK_UDP or SOCK_IPRAW), in case of TCP mode it goes to

the SOCK_CLOSED.

cf> ARP-process operates at the SOCK_UDP or SOCK_IPRAW

when the previous and current values of Sn_DIPR are

different. If the previous and current values of Sn_DIPR are

same, ARP-process doesn’t operate because the destination

hardware address is already acquired.

Figure 6 Socket Status Transition