Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 239 2015-08-03
Reference
8.2.21 AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
Response
+CIPDPDP: (list of supported<mode>s, list of supported <interval>, list
of supported <timer>)
OK
Test Command
AT+CIPDPDP=?
Parameters
See Write Command
Response
+CIPDPDP: <mode>, <interval>, <timer>
OK
Read Command
AT+CIPDPDP?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CIPDPDP=<
mode>[,<interval
>,<timer>]
Parameters
<mode>
0 Not set detect PDP
1 Set detect PDP
<interval>
1<=interval<=180(s)
<timer>
1<=timer<=10
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
If "+PDP: DEACT" urc is reported because of module not attaching to gprs
for a certain time or other reasons, user still needs to execute
"AT+CIPSHUT" command makes PDP context come back to original state.
8.2.22 AT+CIPMODE Select TCPIP Application Mode
AT+CIPMODE Select TCPIP Application Mode
Test Command
AT+CIPMODE=
Response
+CIPMODE: (0-NORMAL MODE,1-TRANSPARENT MODE)