Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 197 2015-08-03
Mode
Max Response
Time
-
Reference Note
 A group of parameters <freq1>, <freq2>, <periodOn>, <periodOff>,
<nextIndex> is used to define a tone. The index is defined from 0 to
4.AT+SIMTONEX supports up to five tone and the tones will play
cyclically according the order specified by <nextIndex>. For example,
with "AT+SIMTONEX=1,10000,800,0,500,10,2,2000,0,500,100,
2600,0,500,10,1,1700,0,500,10,4,2200,0,600,100,0",the order is
800-> 2600->2000->1700->2200->800 and so on.
 This command support play in call, but the <duration> is limited to
10s.
6.2.66 AT+CROAMING Roaming State
AT+CROAMING Roaming State
Response
+CROAMING: <state>
OK
Execution
Command
AT+CROAMIN
G
Parameters
<state> 0 Home network
1 International network(different mcc)
2 Other network(different mnc but same operator)
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
6.2.67 AT+CNETSCAN Perform a Net Survey to Show All the Cells’ Information
AT+CNETSCAN Perform a Net Survey to Show All the Cells’ Information
Response
+CNETSCAN: (list of supported <format>s)
OK
Test Command
AT+CNETSCA
N=?
Parameters
See Write Command
Read Command
AT+CNETSCA
N?
Response
+CNETSCAN: <format>