Data Sheet

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 17 2015-08-03
6.2.61 AT+CANT Add AT command
6.2.62 AT+CAGCSET Add AT command
7.2.9 AT+CGEREP
Modify parameter description and add URC
example
8.2.7 AT+CIPSHUT Add Max Response Time
8.2.10 AT+CIICR Add Max Response Time
8.2.21 AT+CIPDPDP Modify parameter’s scope
8.2.26 AT+CIPRXGET Modify parameter options
16.2.1 AT+DDET
Add parameter and URC description in write
command,add note
17.2.1 AT+CREC Modify note
17.2.2 AT+CRECORD Add AT command
18.2.2 AT+CTTSPARAM Modify note and parameter default value
20.16 AT+DDET Modify AT+DDET example
21.5 AT+CTTSPARAM Add differences of some AT commands
21.6 AT+CHFA Add differences of some AT commands
AT+CEXTHS,AT+CEXBUT Delete
All
Add or modify Parameter Saving Mode and
Max Response Time
1.1 Scope of the document Add SIM800G
2.2.28 AT&C Modify parameter format
2.2.32 AT&W Modify parameter stored by &W
2.2.41 AT+IPR Add parameter description
3.2.6 AT+CCWA Modify <status> decription
3.2.24 AT+CPBS Add “FD” phonebook
3.2.46 AT+CALS
Add parameter <switch> for playing/stopping
tone
5.2.1 AT+STKTRS Modify the length of parameter
6.2.1 AT+SIDET Extend parameter <channel>
6.2.4 AT+CMIC
Extend parameter <channel>, add default value
description in note
6.2.5 AT+CALA Modify indicate expired alarm
6.2.13 AT+CLDTMF
Extend parameter <DTMF string> and add
parameter <timeBase>, add the funcion that
local DTMF tone can be played in call.
6.2.56 AT+CMICBIAS Add note description
6.2.58 AT+SJDR Modify format error
6.2.63 AT+SD2PCM Add AT command
V1.03 2014-03-28
6.2.64 AT+SKPD Add AT command