Manualshelf

Quick Reference Owner manual

ManualsBrandsElecraft ManualsAccessories communicationKX3
12
8
Display (LCD)
Bar graph, receive mode: Normally acts
as an S-meter. If C W T is turned on, the
right half of the S-meter becomes a tuning
aid.
Bar graph, transmit mode: Normally
shows SW R and R F output. In voice and
data modes, the bar graph shows CMP
(compression) and ALC whenever mic
gain or compression are adjusted.
VFO Icons: Shows that a VFO is locked.
The TX icon points to the transmit VFO:
TX
A
VFO A is the transmit VFO
TX
B
VFO B is the transmit VFO; see
VFO A
Filter Passband Graphic: Shows
location of receive passband
Filter Icons:
NTC H Notch filtering on (NTC H)
Manual notch (NTC H)
I / II PBT filter function (I/ I I )
XFI L Extended filtering (FL1 -FL5 )
Mode Icons
Basic modes (LSB or US B , C W , DAT A , AM, or
FM) are selected by tapping M O D E . Alternate modes
(CW R EV, D A T A REV, A M- S, FM +/- ) are
selected by holding ALT . LSB and USB are alternates
of each other. In SSB mode the + icon indicates
ESSB. T indicates FM/tone, CW/DATA text decode,
or AM-Sync auto-tracking.
Other Icons:
CWT CW/data tuning aid on (CWT )
Message play/rec (M S G / REC )
VO X VOX enabled (V O X )
QSK Full break-in CW enabled (D L Y )
NB Noise blanker on (N B )
NR Noise reduction on (N R )
ANT Antenna 1 /2 , KXAT100 (A N T )
SPLIT