Manualshelf

Owner`s manual

ManualsBrandsElecraft ManualsAccessories communicationK3EXREF
891011121314151617
16
If you have the K144XV 2-meter module installed, connect the coaxial cable from the main KSYN3A
synthesizer board to
REF IN as shown in Figure 14. Also reconnect the power cable as shown.
If you have the KRX3 subreceiver installed, dress the coaxial and power cables as shown in Figure 14. The
area on top of the KRX3 enclosure must be clear of all wires and cables as shown for the K3 top to fit properly.
Figure 14. Connecting and Dressing the Cables.
If you removed the chassis stiffener (see Figure 4 on page 9) replace it now. If you have the KPA3 100-watt
option installed, be sure to replace the two screws that attach the stiffener to the KPA3 shield.