User Manual
Procedure
1
Connecting to a Wireless LAN
Router (Router Mode or
Access Point Mode)
A
Windows 8.1 / 8 / 10
B
Windows 7/Vista/XP
Procedure
2
Connection
Pointtotheupper-rightcornerofthescreentodisplaythe
Charmsbar,andthenclick[Settings].
Fromthelistofnetworks,selectthenetworkthathasthe
sameSSIDasthenetworkwrittenontheincluded"Setup
InformationSheet,"andthenclick[Connect].
Holddowntheproduct's[WPS]buttonforapproximately3
seconds.Whenyoureleasethebutton,theproduct's
"WPS/RESETlamp"willstarttoblinkingreen.
Checkthatthemessage"Youcanalsoconnectbypushingthe
buttonontherouter."isdisplayed.
Clickthewirelessicon.
Ifascreenisdisplayedwiththemessage"Doyouwantto
turnonsharingbetweenPCsandconnecttodevicesonthis
network?",click"Yes,turnonsharingandconnectto
devices."
ClickthewirelessLANiconinthenotificationareainthe
lower-rightcornerofthescreen.
Fromthelistofnetworks,selectthenetworkthathasthe
sameSSIDasthenetworkwrittenontheincluded"Setup
InformationSheet",andthenclick[Connect].
Eventually,the"ConnecttoaNetwork"dialogboxwill
disappearautomatically.
C
Mac OS (Wireless LAN Connection)
Clickthe[Applemenu]intheupperleftofthescreen,and
thenclick[SystemPreferences].
Click[Network].
Checkthat"Status"fortheAirMac(Wi-Fi)haschangedto
"On."
Fromthelistofnetworks,selectthenetworkthathasthe
sameSSIDasthenetworkwrittenontheincluded"Setup
InformationSheet."
Apasswordentryscreenwillbedisplayed,soenterthe
(13-digit)encryptionkeywrittenonthe"SetupInformation
Sheet,"andthenclick[OK].
Dependingonthehotel,thewebbrowser(suchasIEandSafari)mayrequireyou
tocertifyyourself.Inthissituation,checkwiththehotelregardinghowtodothis.
Fromyourterminal,opentheAppStore(iOS)orGooglePlay
(Android),searchfor[QRlink],andtheninstallthesoftware.
Onyourterminal'shomescreen,tapthe[QRlink]icon.
Followtheinstructionsonthescreen,andthentap
[Close]tofinishtheprocedure.
Tap[ReadQRCode]toreadtheQRcodeprintedonthe
included"SetupInformationSheet."
Installthesimplesetupapplication"QRlink"(freeofcharge),
andthenconfigurethesettings.
D
Smartphones and tablet PCs(iOS/Android)
ConnectaLANcable(eitheronethatyouhavepurchased
separatelyoronethatisprovidedbythehotel)tothe
LANportinthehotelroomandtothisproduct's
ETHERNETport.
Supplypowertotheproductaccordingtothe
instructionsunder"SupplyingPower."
Checkthatthisproduct'slampsareasshownbelow:
Connecttothenetworkaccordingtotheinstructions
under"Procedure2,Connection."
Whenthe"ConnecttoaNetwork"dialogboxisdisplayed,
enterthe(13-digit)encryptionkeywrittenabove,and
thenclick[OK].
IfyouareusingtheWPSfunctiontoestablishtheconnection,
holddowntheproduct's[WPS]buttonforapproximately3
seconds.Whenyoureleasethebutton,theproduct's
"WPS/RESET"lampwillstarttoblinkingreen.
■SupplypowerusingaseparatelysoldUSBpower
supplyadapterandtheincludedUSB(Micro-BtoA)
cable
■SupplypowerusingaPCUSBportandtheincluded
USB(Micro-BtoA)cable
*UseaUSBpowersupplyadapterthathasanoutputof5V
and500mAormore.
Supplying Power
① ETHERNETlamp Litingreenorblinkingingreen
③ WPS/RESETlamp Off
② WLANlamp
Litingreenorblinkingingreen
PowerissuppliedtotheproductfromanACadapterorviaUSB
fromaMicro-USB(micro-BtoA)cable.
步骤
1
连接无线局域网路由器
(路由器模式)
(访问点模式)
A
Windows 8.1 / 8 / 10
B
Windows 7/Vista/XP
步骤
2
连接
将鼠标器放到屏幕右上角,出现超级按钮栏,点 击[设置 ]。
从网络列表中选择与附带的“ 设置信息表 ”上所记载的相
同的 SSID,并点击[连接 ]按 钮。
长按本产品的[WPS 按钮]3 秒钟左右然后放开,本产品的
“WPS/RESET 指示灯 ”开始绿色闪烁。
确认“ 按下路由器的按钮也无法连接。”的消息。
点击无线的图标。
弹出“ 启 用 电脑共享 ...”窗口后,点击“ 是,启用共享并连接
到设备 ”。
点击屏幕右下方任务栏上的无线局域网的图标。
从网络列表中选择与附带的“ 设置信息表 ”上所记载的相
同的 SSID 并点击[连接 ]按 钮。
不久,“ 连接到网络 ”窗口自动关闭。
C
Mac OS(无线局域网连接)
点击屏幕左上方的[苹果菜单],点 击[系统环境设置 ]。
点击 [网络 ]。
确认 AirMac (Wi-Fi) 的“ 状况 ”为“启用”。
从“ 网 络名称 ”列表中选择与附带的“ 设置信息表 ”上所
记载的相同的 SSID 。
弹出密码输入窗口,输入“ 设置信息表 ”所记载的密钥(13
位数)并点击[确定]。
有些酒店可能需要用Web浏览器(IE或Safari等)进行认证,如果需要认证,请向
您下榻的酒店确认认证方法。
从智能 手机或平 板电脑打开 AppStore(iOS)或 Google Play
(Android),搜索[QR link]并安装。
触摸智能手机或平板电脑的主屏上的[QR link]图标。
按 照 屏 幕 上 的 指 示 ,最 后 触 摸[ 关 闭]按 钮。
触摸[QR 码读取 ], 读取附带的“ 设置信息表 ”上打印的
QR 码。
安装简单设置应用程序“QR link”(免费),进行设置。
D
智能手机/平板电脑(iOS/Android)
将另售的或者酒店内设置的局域网电缆连接到酒店客房的
局域网端子与本产品的 ETHERNET 端口上。
参 考“ 取 电的方法 ”取电。
确认本产品指示灯的状态是否如下所示。
请参 考“ 步 骤 2 连接”,接入网络。
弹出“ 连接到网络 ”的窗口后,输入上面的密钥(13 位数)
并点击[确定]。
使用 WPS 功能连接时,长按本产品的[WPS 按钮]3 秒 钟
左右后放开,本产品的“WPS/RESET ”指示灯开始绿色闪
烁。
■用另售的 USB 供电适配器
+附带的 USB(microB-A)电缆供电
■ 用电脑的 USB 端口
+附带的 USB(microB-A)电缆供电
※USB供电适配器请使用具有5V 500mA以上的输出的产品。
取电的方法
① ETHERNET 指示灯 绿色亮灯或绿色闪烁
③ WPS/RESET 指示灯 熄灭
② WLAN 指示灯
绿色亮灯或绿色闪烁
(※)
(※)
Simple Manual
WRH-300xx3 / WRH-300xx3-S WRH-300xx3 / WRH-300xx3-S
通 AC适配器或 Micro-USB
(microB-A) 电缆的USB 供电功能供电。