User Manual

This product can be used to switch between two Bluetooth devices.
Switch between connected Bluetooth devices in the following way.
1) Slide the switch to switch between “PC1” and “PC2”.
2) Pair with the selected connected device.
1) Slide the switch to switch between “PC1” and “PC2”.
2) When the device to be switched is connected, the LED lamp will blink for
about 3 seconds.
1. Insert battery
Switch when pairing
To pair, please refer to “How to use” → “Connecting and setting up the mouse” → (OS
specific) → “3. Pairing with a PC”.
Switch during use
When paired with only one of either “PC1” or “PC2”, the current connection will be cut
off when the switch is slid to the other side that is not paired.
Sliding the switch to the side paired with the connected device will restore the
connection.
Connecting and setting up the mouse
Windows