User Manual

⑥ LED light
⑦ To switch devices
Use to switch between devices connected to this product.
Please refer to “Switch connected device”.
⑧ Optical sensor
The light will turn green when the battery is put into the mouse.
This sensor will detect the mouse movements when you move the mouse.
* Please note that looking directly into the sensor light may hurt your eyes.
⑨ Pairing button
Pair the mouse with your deviceʼs Bluetooth module or a Bluetooth adapter.
⑩ Power switch
Turns the mouse power on (ON) and off (OFF).
⑪ Battery cover
Remove this cover and put in the battery.
⑫ Battery storage compartment
Holds the battery.
⑬ Battery removal sheet
Used to remove the battery from the battery storage compartment.
Switch connected device
This product can be used to switch between two Bluetooth devices
You will need to install the ELECOM Mouse Assistant for Mac from our website
to use the "Back" and "Forward" button on Mac. Refer to “Install ELECOM Mouse
Assistant”.
The light underneath the wheel flashes in red when the mouse is in a pairing standby
state.
The base of the wheel illuminates in red for a few seconds when the power is turned on.
The light around the mouse will start to blink red when the battery level is low.