User Manual

2. Turn the power ON
1) Slide the power switch on the underside of the product to the ON position.
The LED lamp will blink periodically according to the amount of battery left.
* When the battery level is low, the number of times the LED lamp blinks will decrease.
3. Pairing with an iPad or an iPhone
Replacing the batteries...
Pull the battery removal sheet to remove the battery and replace it with a new one.
Power-saving mode
When the mouse is left untouched for a fixed period of time while the power is ON, it
automatically shifts to power-saving mode.
The mouse returns from power-saving mode when it is moved.
* Mouse operation may be unstable for 2-3 seconds after returning from the power-
saving mode.
Pairing involves registering Bluetooth devices (in this case, this product and an iPad or an iPhone)
with each other, and authorizing a connection between them.
Tapping is required to operate the iPad or iPhone device until pairing is complete.
The following instructions are for iPadOS Ver.14.8.