User's Manual

2) Start up your PC.

Please wait until your PC has started up and can be operated.

3) Connect the USB-A side of the included USB Type-C - USB-A cable into the USB-A port

of the PC.

4) The driver will be automatically installed, and you will then be able to use the mouse.

You can now use the mouse.

You will be able to assign functions to all the buttons, and setup the DPI count and light by installing the

settings software “ELECOM Accessory Central”. Proceed to “Setup with ELECOM Accessory Central”.

Ensure that the connector is correctly oriented to the port.

If there is strong resistance when inserting, check the shape and orientation of the connector.

Forcibly inserting the connector may damage the connector, and there is a risk of injury.

Do not touch the terminal portion of the USB connector.

Speciﬁcations

cable

port