SAMPLE M-VM600, EG01A Wireless Mouse User Manual How to use Connecting and setting up the mouse Using in wireless mode 1.
1) Plug the Type-C connector of the included USB Type-C - USB-A cable to the USB Type-C port of this product. USB Type-C port cable 2) Plug the USB-A connector of the USB Type-C ― USB-A cable into the USB-A port of the PC. port Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury.
It will take approximately x.x hours until full charge. If the green LED light does not stay lit up even after the prescribed charging time, remove the USB Type-C - USB-A cable and stop charging for the moment. Otherwise, this can cause heating, explosions or fires. 2. Turn the power ON 1) Slide the power switch on the underside of this product to the ON position. The notification LED will light up red for 3 seconds.
You may use any USB-A port. If there is a problem with the position of the computer, or with the communication between the receiver unit and this product, you can use the included USB-A - USB Type-C adapter with the included USB Type-C - USB-A cable, or place this product where there will be no problems with the communication with the receiver unit. cable adapter Receiver unit Ensure that the connector is correctly oriented to the port.
cable 2) Start up your PC. Please wait until your PC has started up and can be operated. 3) Connect the USB-A side of the included USB Type-C - USB-A cable into the USB-A port of the PC. port Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector.
Connection method USB2.4GHZ wireless (USB wired when connected via cable) Supported OS Windows11, Windows10, Windows 8.1, Windows 7 * Update for each new version of the OS or the installation of a service pack might be required. Communication method GFSK Radio frequency 2.4GHz Radio wave range When used on magnetic surfaces (metal desks, etc.): approximately 3m When used on non-magnetic surfaces (wooden desks, etc.
Compliance status Model/모델명/设备型号/型號: M-VM600 China / 中国 RoHS Compliance (产品中有毒有害物质或元素的名称及含量) EU CE Declaration of Conformity RoHS Compliance Importer EU Contact (For CE matters only) Around the World Trading, Ltd. 5th floor, Koenigsallee 2b, Dusseldorf, Nordrhein-Westfalen, 40212, Germany WEEE Disposal and Recycling Information This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste.
Taiwan / 台灣 BSMI RoHS statement (限用物質含有情況標示聲明書) M-VM600: XXXXXXXXXXXXXX EG01A: XXXXXXXXXXXXXX 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功 能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方 得繼續使用。 前述合法通信，指依電信管理法規定作業之無線電通信。 低功率射頻器材須忍受合法通信或工業、科學及醫 療用電波輻射性電機設備之干擾。 UK UK Declaration of Comformity RoHS Compliance Importer UK Contact (For UKCA matters only) Around the World Trading, Ltd.
US FCC ID: YWO-M-VM600 FCC ID: YWO-EG01A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules.
