Product Guide
32 33User guide elecbrakes.com
When Tapped Response When Tapped Response
1. Select ‘When Tapped’ under
Override in program screen.
2. Scroll the setting to a higher value
than your Forward Response
setting. Start at 5% greater.
3. When driving tap the system state button to activate
the manual override - button displays as bright red.
Return to Settings > Device > When Tapped
Adjust response until you are satised that the brake
response will apply the trailer brakes at a level that
satises your needs.
Note: Typically, the Manual Override would be used when
trailer brakes “only” need to be applied. Some scenarios
where this may be applicable are:
• To apply brakes to assist in sway control.
• To correct sideways shift of trailer on soft
downhill ground. I.e. sand.
• To apply heavier braking on trailer on a steep
downhill descent.
The When Tapped value is a Manual
Override. Activated by tapping on the
System State Button on the home
screen. This brake response will
activate only the trailer brakes at
the set value.